|
Individual Shower Units
 |
These individual shower
units measuring 4' x 4' have a push button
water supply, a slatted floor for drainage
and a shower curtain to protect your
clothes., The door is locked from the inside
like the individual chemical toilets.
 |
ELECTRICITY SUPPLY
240Volts, 16 Amp (3Kw). THIS UNIT MUST BE EARTHED.
WATER SUPPLY
Cold water only, 15mm hose pipe connection. Mains
pressure 10-100N/cm
INSTALLATION & OPERATION
- The shower units must be installed by a
qualified Electrician/Plumber
- Prior to connecting the power cable to the
shower, the water MUST be connected and turned
on, and the system primed. FAILURE TO DO SO WILL
BURN OUT THE HEATER ELEMENT.
DECOMMISSIONING
- Turn off the power and unplug the socket on
the outside of the cabin.
- Drain the water from the tank - you will
need to open the shower case and turn the drain
cock. It will drain into the floor tank.
- When all the water is out, retighten the
drain cock. Do not over tighten.
- To re-commission, repeat the installation
instructions above.
|
